我的妺妺H伦浴室

                主要施工器具

                主要施工器具
                Main Application Equipment and Tools
                No.
                器具名稱 作用功能
                1

                含水率檢測儀

                Moisture tester

                檢測混凝土基面的含水率,以確定是否適合施工

                Check concrete surface moisture to determine applicability

                2

                拉拔實驗儀  Pull-off tester

                回彈儀        Rebound hammer

                檢測混凝土基面的粘結強度  Check cohesive strength of concrete substrate

                檢測混凝土基面的抗壓強度  Check compressive strength of concrete substrate

                3

                拋丸(噴砂)機

                Shot blasting machine

                對混凝土基面進行糙化處理,最理想的處理工具

                Roughen concrete substrate, optimal preparation tool

                4
                無塵研磨機

                Dust-free grinding machine

                對混凝土基面進行糙化處理

                Roughen concrete substrate

                5
                銑刨機

                Scarifier

                快速清除不需要之舊涂層等,并使基面糙化

                Quick-remove old coatings, also for surface roughening

                6
                抹光機(環氧砂漿用)

                Trowelling machine ( Mortar application )

                施工環氧砂漿,抹平,壓實,以期達到最佳強度

                For epoxy mortar application, provide level, dense and high strength mortar floor

                7
                高壓無氣噴涂機

                High-pressure airless sprayer

                涂層地坪面層進行噴涂施工,獲得最佳的外觀

                Spray top coat paint to gain optimal appearance

                8
                切縫機

                Joint cutter

                整齊切開所設伸縮縫并填充彈性體

                Cut joint to receive elastic filler

                9

                鏝刀

                Trowel

                施工厚涂層

                Apply thick coat

                10
                各種滾筒

                Roller

                • 針刺滾筒:消泡                   Spike roller : remove bubble
                • 紋理泡沫滾筒:紋理狀面層   Textured roller : achieve textured finish
                • 長毛滾筒:拉毛,底涂          Long pile roller : primer application
                • 短毛滾筒:面涂                   Short pile roller : top coat application
                11
                清洗機

                Cleaning machine

                清洗已完工面層并進行養護

                Clean finished top coat surface and start curing

                12
                電阻機(兆歐表)

                Electrical resistance tester

                測定涂層的導電性能

                Check conduction property of the coat

                13
                溫濕度計,表面溫度計

                Thermo-hygrometer, surface thermometer

                測定施工環境的濕度,測定欲涂基面的溫度

                Check environmental temperature, humidity and coated surface temperature


                TEL

                15316367090

                首頁
                電話
                短信
                聯系
                我的妺妺H伦浴室